Reversible plate compactor Dynapac LG 500 with weight of 500 kg appeared to be very useful for our partners, who were able to solve their project tasks with its help.

The rent of equipment from Ramirent is available across all territory of Ukraine, and our offices are working in Kyiv, Donetsk, Dnipropetrovsk, Odesa and Lviv.

• Works without batteries, engine, does not need any vehicle for relocation
• Environmentally friendly
• Extremely compact for stocking
• Possibility of being complemented by road chassis for transportation by a motor car

Technical specifications

- Safe load	250 kg
- Operating height	9,1 m
- Maximum platform (bottom) height	7,1 m
- Fencing height	1,02 m
- Platform size	1,85 х 0,61 m
- Assembled height	1,58 m
- Assembled length–	2,23 m
- Assembled width	0,92 m
- Width without supports	0,74 m
- Width with supports	2,43 m
- Length with supports	2,58 m
- Weight	290 kg

Intended use:
For freight transportation in small premises

Description of loader and its unique features:
Compact miniloader Manitou series TWISCO SLT 420B is intended for public utility and engineering works. This equipment is essential during the cold season on Russian roads being a powerful and modern tool for cleaning territories.

Specifications of Manitou SLT 420 B

Technical parameters of excavators-loaders CASE:

Key features of mini-loaders CASE:

• 2 regulated movement limiters dercrease load on boom;
• allowed loading capacity can be regulated with the help of additional deadweight;
• new construction of cabin provides protection during inversion and protection from falling objects, and you need to unscrew only two nuts to recline it;
• cadin design provides better front and rear visibility, visual control over attachments and more space for an operator;
• hydraulic system of bucket leveling during elevation simplifies operations with forks;
• optimized unloading angle in models with vertical kinematics allows to speed the working cycle up;
• efficient high-pressure system allows to use equipment that require high torque;
• all models are equipped with automatic attachment system and automatic pressure release system.

Technical parameters of mini-loaders CASE:

Parameter		unit	SR 150	SR 200	SV 250
Power		hp	52	74	82
Engine volume		l	2	3,2	3,2
Working weight		kg	2400	3130	3630
Load capacity		kg	680	905	1135
Speed of movement		km/h	10,7	10,7	10,7
Hydraulic pump usage	standard	l/min	59	85	85
	add.	l/min	-	31	46
Working cycle	lifting	sec	3,4	3,7	4,1
	lowering	les	2,1	1,9	2,6
	bucket inversion	sec	1,9	2,3	2,7
Dimensions		unit	SR 150	SR 200	SV 250
Length		m	3,03	3,30	3,60
Height at bucket finger		m	2,84	3,12	3,30
Bucket inversion height		m	2,15	2,40	2,60
Reack at max.unloading height		m	0,47	0,52	0,70
Wheel base		m	0,94	1,13	1,30
Width at wheels		m	1,52	1,63	1,70

Additional information is available at the following page.

Rental point is located at Staromykolaivska road, 101 (Fontanka), at the territory of OBI do-it-yourself hypermarket, and offers large assortment of equipment - from hand instrument to special heavy machines.

Contact phones of rental point: (067) 239-25-93 and (067) 447-17-10.

Opening hours:
     Mon - Fri       8.00 – 19.00
     Sat - Sun      9.00 – 18.00

Follow to the page with contact information...

The branch offers more than 1500 units of equipment and machinery and is located at Viskozna str., 3-d (see map below).

At the moment the following equipment is available:

Note: Prices are in euro including VAT. Payment is made in UAH according to NBU rate on the payment date.

For more information about Ramirent equipment intended for sale please contact our manager for rental and sale:

(044) 495-83-20

Mon-Fri:  8.00 - 18.00
Sat:       9.00 - 17.00

The tenant company notes high performance and quality of work performed by five hundred kilos reversible vibrating plates.

The event was held at the parking place nearby the shopping mall Domosfera. A part of ambit was fenced with our mobile fences with total length of 300m.

CE Budova manufactures according its own technology and assembles facing panels made of foamed fibre concrete (such panels weigh up to 650 kg). Until recently, such works were performed with column carne, which led to numerous inconveniences.

Maeda Mini-Crane allowed expediting construction 4-5 times owing to its maneuvering capabilities. Small dimensions enable the crane to move freely along a storey through ready doorways, and the specially brought and installed hook for 2-fall steel wire rope allows assembling panels 6-7 storeys downwards from the crane location.

Another peculiarity of this crane is its ability to operate either supplied with own diesel generator or power network 380 V.

Because of preparation to this event, Ramirent gave in rent 5 office-living containers Containex.

More pictures:

Go to page “SDMO Generators"...

Address of branch: 51 200, Novomoskovsk, 117 Suchkova St. (see map)

For all issues relating to equipment rental in the new branch, please contact our managers:

Tel. (056) 787-05-92
fax (056) 787-05-93

Two-wheel tandem roller with hydraulically driven manual control is designed for ground and asphalt works. It is widely used in new construction and maintenance on tracks, roads, dirt roads, pavements, bicycle paths, parking lots, sites, playgrounds. With a hydrostatic drive and a large diameter roll, these machines are particularly preferred for asphalt work, as they provide a high quality surface finishing layer.

Liebherr R 924 combines the excellent performance results of a crawler excavator. It is synonymous with versatility, power and maximum possible performance. Such innovative features as a modular system of quickly replaceable tools and a centralized lubrication system, fitted in a standard version, reduce the unproductive time losses when replacing tools and maintenance.

Used in construction for large earthworks.

Performance of the excavator is achieved through:

• Optimal power when operating a bulldozer;
• Simple and precise control;
• Huge grasp width;
• High speed of rotation;
• Optimum stability of machine.

Engine

Perkins 1006-60T

APPLICATIONS

Compression of soils (sand, gravel and crushed stone), weakly bound and stabilized soils on large areas.

• dispatch, loading/unloading;
• operator’s work;
• fuel supply;
• monitoring of equipment operation;
• provision of electrical power and control cables of the corresponding cross-section, electric service panels, cabinets of automatic load transfer;
• supporting service: putting into operation, training of the customer’s staff, 24-hour service etc.

Diesel burners of Thermobile heat guns feature a maximized task automation - in particular, they are equipped with a mixture pre-heating system and have a built-in automation for ignition and flame control. The main feature of Thermobile heat guns of TA line is their design that allows to eliminate the need in an exchanger: the air quickly goes through the nozzle of the combustion chamber with a temperature of about 450 degrees, thus ensuring an excellent efficiency of the complex. Besides, the series of Thermobile heat guns has the following advantages: hot air is quickly supplied after turning-on the device; the body is always cool outside irrespective of the time of operation of the gun and temperature inside the chamber; all automation is dustproof and waterproof, and also can be supplied with protection against abrupt voltage variation; the system filter is easily replaced and cleaned, the details and spare parts are sold all over the country; in case of fire the complex of Thermobile heat gun is instantly turned off. Thermobile heat guns of ITA series are equipped with a heat exchanger that enables to use air without combustion products at the outlet. IMA line of Thermobile heat guns features high performance generators supplied with axial and radial ventilation systems.